Knowledgebase:
Why N4910 N8910 N12190 N16910 series WOL doesn't work?
Posted by Yvon Lei, Last modified by Yvon Lei on 03 December 2019 15:46

Why N4910 N8910 N12190 N16910 series WOL doesn't work?

*WOL = Wake On LAN
**N4910 = N4910U PRO-S, N4910U PRO-R, N4910U-S & N4910U-R

Please assist us to ensure related BIOS configure been enabled:
1.Install a VGA or HDMI monitor, USB keyboard and mouse to the NAS
2.Press F2 or DEL to enter UEFI Setup.
3.Advanced > ACPI Configuration > PCI Devices Power On > Enabled
4.Press F10, save settings, and then reboot.

請協助我們確保相關的BIOS配置已啟用:
1.安裝 VGA或HDMI螢幕、USB鍵盤滑鼠到NAS機器上
2.按F2或DEL進入UEFI設定
3.Advanced > ACPI Configuration > PCI Devices Power On > Enabled
4.按F10存檔然後重啟機器。

请协助我们确保相关的BIOS配置已启用:
1.在NAS上安装VGA或HDMI显示器,USB键盘和鼠标
2.按F2或DEL进入UEFI设置。
3.PCI Devices Power On > Enabled
4.按F10,保存设置,然后重新启动。

関連するBIOS設定が有効になっていることを確認してください:
1. VGAまたはHDMIモニター、USBキーボードおよびマウスをNASにインストールします
2. F2またはDELを押してUEFIセットアップに入ります。
3.詳細設定> ACPI設定> PCIデバイスの電源投入>有効
4. F10を押して設定を保存し、再起動します。

Related WOL FAQ:

How to WOL via internet?(Eng,繁中,簡中)
https://thecus.kayako.com/default_import/Knowledgebase/Article/View/167

Wake On Lan (WOL)
https://thecus.kayako.com/default_import/Knowledgebase/Article/View/35

OS6 NAS support WOL & auto(always) power on?
https://thecus.kayako.com/default_import/Knowledgebase/Article/View/248

WSS FAQ: Why WOL work from hibernation, but power off (S5)?
https://thecus.kayako.com/default_import/Knowledgebase/Article/View/664

Does N3200 support WOL?
https://thecus.kayako.com/default_import/Knowledgebase/Article/View/104

(0 vote(s))
Helpful
Not helpful

Comments (0)