SEARCH
Knowledgebase
How OS6 N2310 N4310 N2520 N2560 N4520 N4560 set partition name back
Posted by Yvon Lei on 11 November 2016 12:31

How OS6 N2310 N4310 N2520 N2560 N4520 N4560 set partition name back

How _N2310_set_partition_name_backEAMDE file & “gofactory” into an USB root folder.

  1. Unzip and copy REAMDE file & “gofactory” into an USB root folder.
  2. Please USB and HDDs into NAS.
  3. Power NAS up and you will hear beep for 1 second. The function will execute.
  4. When set partition name successfully, you will hear beep for 3 second and then system will shutdown. If fail and you will hear beep uninterruptedly.

* If you have old OS6 data (If you need the data), since click NEXT and you should able to access NAS ADMIN WEB page. If not and asking to "Create RAID" please refer to following FAQ:
http://thecus.kayako.com/default_import/Knowledgebase/Article/View/629/0/if-n2310-hw-replaced-but-cant-access-to-raid-data

***If can't update or unsuccessful, please provide the LOG file from USB driver for your tech staff to check for you.

Examples: USB root.
│ mtd-utils-1.4.3-1.1.t2.ppc.rpm
│
└─gofactory
    │ factory_test.sh
    │ set_partition_name.sh
    │ utility_start.sh



Attachments 
 
 Thecus_USB_set_partition_name_1.0.0.zip (3.04 KB)
(0 vote(s))
Helpful
Not helpful
Comments (0)