Knowledgebase:
How to remove the hotspare and add it to the RAID?
Posted by - NA -, Last modified by on 29 December 2008 08:56
Please refer the following instruction to remove the spare mark.

  1. Shutdown the NAS
  2. Remove the spare disk.
  3. Power ON the NAS.
  4. After NAS boot completed, hot-plug the spare disk.
  5. Go to admin console [Storage > RAID > RAID Config] you will see the RAID box of the spare disk is available.
(1542 vote(s))
Helpful
Not helpful
Comments (0)