Knowledgebase
Master RAID
Posted by - NA - on 29 December 2008 06:41
In a multiple RAID configuration, one RAID volume must be designated as the Master RAID volume. The Master RAID volume will store all installed modules. If the Master RAID is changed to another location (i.e. assigning HDD 2 to be the Master RAID volume after HDD 1 had been previously assigned), then all modules must be reinstalled. In addition, all system folders that were contained on the Master RAID volume will be invisible. Reassigning this volume to be the Master RAID will make these folders visible again.

When you create a RAID which is meant to be the Master RAID volume, please tick the Master RAID checkbox. 
(896 vote(s))
Helpful
Not helpful

Comments (0)