Knowledgebase
Since N2310 HW replaced and first boot with data RAID HDD(Eng,繁中,簡中)
Posted by Yvon Lei on 05 August 2016 12:52

Since N2310 HW replaced and first boot with data RAID HDD,please confirm following items:


1 Please download & use latest INTELLIGENT NAS V1.01.20 from http://install.thecus.com.
2 Since INTELLIGENT NAS discovered N2310, just need click “NEXT” twice & “START BROWSER”, then you could access to the N2310 ADMIN WEB。(As following picture)
3 If have other text or page occurred, as like “ASSIST RAID”, “CREATE RAID” or “RAID REASSE….”, please check following steps:
3.1 Press power button make NAS off.
3.2 Please refer to following FAQ How N2310 set partition name back:
http://thecus.kayako.com/default_import/Knowledgebase/Article/View/685/0/how-n2310-to-set-partition-name-back
3.3 Prepare remote assist from http://goo.gl/ztuAVQ
3.4 Submit ticket from http://esupport.thecus.com


---------------------------------------------------------------------------------------------------------------------------- -------------

當N2310 完修之後,將有資料的N2310 舊硬碟,與N2310進行第一次開機,請注意以下項目:

1 請至 http://install.thecus.com 下載更新至最新的INTELLIGENT NAS V1.01.20 版本,再來進行設定。
2 當INTELLIGENT NAS 找到機器,只需要按兩次NEXT 後,再點選 START BROWSER,即可連到NAS。
3 若是有其他文字或畫面出現如 “ASSIST RAID” “CREATE RAID” 或 “RAID REASSE….” 請參考以下方式:
3.1 按下電源鈕將NAS 關機。
3.2 請參考以下FAQ中的USB工具:
http://thecus.kayako.com/default_import/Knowledgebase/Article/View/685/0/how-n2310-to-set-partition-name-back
3.3 並準備以下連線方式 http://goo.gl/rsBRd8
3.4 至 http://esupport.thecus.com 與我們聯絡。


---------------------------------------------------------------------------------------------------------------------------- -------------

当N2310 完修之后,将有数据的N2310 旧硬盘,与N2310进行第一次开机,请注意以下项目:

1 请至 http://install.thecus.com 下载更新至最新的INTELLIGENT NAS V1.01.20 版本,再来进行设定。
2 当INTELLIGENT NAS 找到机器,只需要按两次NEXT 后,再点选 START BROWSER,即可连到NAS。
3 若是有其它文字或画面出现如 “ASSIST RAID” “CREATE RAID” “RAID REASSE….” 请参考以下方式:
3.1 按下电源钮将NAS 关机。
3.2 请参考以下FAQ中的USB工具:
http://thecus.kayako.com/default_import/Knowledgebase/Article/View/685/0/how-n2310-to-set-partition-name-back
3.3 并准备以下联机方式 http://goo.gl/rsBRd8
3.4 至 http://esupport.thecus.com 与我们联络。



 



Attachments 
 
 Since N2310 HW replaced and first boot with data RAID HDD-V0.2.pdf (338.68 KB)
(0 vote(s))
Helpful
Not helpful

Comments (0)