Knowledgebase
How to reset N2200 to factory default
Posted by - NA - on 03 July 2015 16:45

Please try again through the following instruction.

1. unzip "USB_Default_Patch.zip",Copy the folder and file to USB flash disk root.
2. Turn-off N2200 and pull out HDD.
3. Plug-in USB flash disk then boot N2200.
4. Wait 1 min and Turn-off N2200 again.
5. Plug-in HDD then boot N2200.
6. N2200 will process reset to factory default, about 3 minutes later plug-off the USB disk, N2200 will reboot itself.



Attachments 
 
 USB_Default_Patch.zip (4.92 KB)
(8 vote(s))
Helpful
Not helpful

Comments (0)