Knowledgebase
N4310 OS6 build 828 & JM patch USB upgrade
Posted by Yvon Lei on 15 May 2015 12:45

N4310 OS6 build 828 JM patch (since 2015/Apr/28)

A. Download 474MB ZIP file from:
http://www.thecus.com/Downloads/DOM/N4310-USB.2.1.2-FLASH-828_JM_patch.zip
B. Please unzip to an empty USB driver root folder.
C. Power N4310 off and eject all HDD out of NAS.
D. Check the configure of HDD
D-1. At least need 2 pcs HDD or more.
D-2. The HDDs should be plug in tray 1 and 3 or tray 2 and 4.
E. Plug USB driver on NAS.
F. Power NAS up and wait about 7~14 mins.
G. Since update completed and system would power off automatically.
* For WD Red & Purple HDD: Please try to arrange other 2 pcs non WD HDD and doing this USB upgrade, and able to see the USB have a log file called JM_PATCH_LOG and have SUCCESS inside.
** If wait over 30 mins or beep continuously and blue power LED blinking still, please provide the LOG file from USB driver for your tech staff to check for you.

Examples: USB root:
│  mtd-utils-1.4.3-1.1.t2.ppc.rpm
│  N4310_OS6.0.828.t2.bin
│  N4310_OS6.0.828.t2.bin.md5
│  nas_img-tools-1.1.5-1.t1.i686.rpm
│  nas_img-tools-1.1.5-1.t2.ppc.rpm
│  README
│  N4310-USB.2.1.2-FLASH-828_JM_patch.txt

└─gofactory
    │  320C_PMX_20150121_33.80.00.04_14.BIN
    │  badblock_check.sh
    │  factory_test.sh
    │  hdd_patch.sh
    │  N2310-series.sh
    │  N2520-series.sh
    │  rpms-md5_validation.sh
    │  setting.conf
    │  spi_up_lnx
    │  upgrade.conf
    │  utility_start.sh
    │
    ├─i686
    │      dd
    │      du
    │      md5sum
    │      sha256sum
    │
    ├─list_repository
    │      Elecom_V1.00_rpms-md5.list
    │      N2310_OS6.build_769.t2_rpms-md5.list
    │
    └─ppc
            dd
            du

 

********************************************************

N4310 OS6 build 827 (since 2015/Jan/28)

A. Download 207MB ZIP file from:
http://www.thecus.com/Downloads/DOM/N4310-USB.2.1.2-FLASH-827.zip
B. Please unzip to an empty USB driver root folder.
C. Power N2310/N4310/N25x0/N45x0 off and eject all HDD out of NAS.
D. Plug USB driver on NAS.
E. Power NAS up and wait about 7~14 mins.
F. Since update completed and system would power off automatically.
*N2310 OS6 have 2 copy OS from NAS internal flash & RAID/JBOD HDD, this update for NAS internal flash only.
**If can't update or unsuccessful, please provide the LOG file from USB driver for your tech staff to check for you.

Examples: USB root.
│  mtd-utils-1.4.3-1.1.t2.ppc.rpm
│  N4310_OS6.0.827.t2.bin
│  N4310_OS6.0.827.t2.bin.md5
│  nas_img-tools-1.1.5-1.t1.i686.rpm
│  nas_img-tools-1.1.5-1.t2.ppc.rpm
│  README
│  USB_UPGRADE_GUIDE_N4310_OS6.0.827.t2.txt

└─gofactory
    │  badblock_check.sh
    │  factory_test.sh
    │  N2310-series.sh
    │  N2520-series.sh
    │  rpms-md5_validation.sh
    │  setting.conf
    │  upgrade.conf
    │  utility_start.sh
    │
    ├─i686
    │      dd
    │      du
    │      md5sum
    │      sha256sum
    │
    ├─list_repository
    │      Elecom_V1.00_rpms-md5.list
    │      N2310_OS6.build_769.t2_rpms-md5.list
    │
    └─ppc
            dd
            du

***************************************

(77 vote(s))
Helpful
Not helpful

Comments (0)