Knowledgebase
How to reinstall N2310 OS? (Eng,繁中,簡中)
Posted by Yvon Lei on 18 May 2016 12:42

How to reinstall N2310 OS?

A. Please confirm or flash your NAS to following OS6 latest build version:
http://esupport.thecus.com/Knowledgebase/Article/View/240/0/n2310-os6-build-latest-usb-upgrade

B. Please downalod Thecus_OS6_USB_OSreinstall-1.0.0.zip
http://www.thecus.com/Downloads/beta/UTILITY/Thecus_OS6_USB_OSreinstall-1.0.0.zip

C. Please unzip to an empty USB driver root folder.

 The USB upgrade structure as like below:
 Z:.
 │  
 └───gofactory
         factory_test.sh
         os_reinstall.sh
         utility_start.sh

D. Plug USB driver on NAS.
E. Power NAS up and wait about 7~14 mins.
F. Since update completed and system would power off automatically.
G. Remove USB driver & power NAS up.

 

=========================================

如何重新安裝 N2310 OS?(繁中)

A. 請確認已用USB隨身碟將NAS重刷至OS6 最新版本:
http://esupport.thecus.com/Knowledgebase/Article/View/240/0/n2310-os6-build-latest-usb-upgrade

B. 請下載 Thecus_OS6_USB_OSreinstall-1.0.0.zip
http://www.thecus.com/Downloads/beta/UTILITY/Thecus_OS6_USB_OSreinstall-1.0.0.zip

C. 請解壓縮到空USB隨身碟的根目錄.

U盤示意圖:
 Z:.
 │  
 └───gofactory
         factory_test.sh
         os_reinstall.sh
         utility_start.sh

D. 將USB隨身碟插到NAS.
E. 將 NAS 開機, 並等約 7~14 分鐘
F. 更新完成系統會動關機.
G. 移除USB隨身碟, 並將NAS 開機

 

=========================================

如何重新安装 N2310 OS?(简中)

A. 请确认已用U盘将NAS重刷至OS6 最新版本:
http://esupport.thecus.com/Knowledgebase/Article/View/240/0/n2310-os6-build-latest-usb-upgrade

B. 请下载 Thecus_OS6_USB_OSreinstall-1.0.0.zip
http://www.thecus.com/Downloads/beta/UTILITY/Thecus_OS6_USB_OSreinstall-1.0.0.zip

C. 请解压缩到空U盘的根目录.

U盘示意图:
 Z:.
 │  
 └───gofactory
         factory_test.sh
         os_reinstall.sh
         utility_start.sh

D. 将U盘插到NAS.
E. 将 NAS 开机, 并等约 7~14 分钟
F. 更新完成系统会动关机.
G. 移除U盘, 并将NAS 开机

(162 vote(s))
Helpful
Not helpful

Comments (0)