Knowledgebase
Why my Intelligent NAS can't discover the N2310 N4310? OS6 (EN, 繁中, 簡中)
Posted by Yvon Lei on 24 April 2017 16:02

Why my Intelligent NAS can't discover the N2310 N4310? OS6

1. Please confirm the Intelligent NAS update to latest version. http://install.thecus.com/
2. Check Windows firewall from WINDOWS START => search programs and files => Allowed Programs=>Check all box about “Thecus Intelligent NAS”=>APPLY/OK
3. Link N2310/N4310 & NB/PC to your Route/AP/Switch under DHCP mode, and power up N2310/N4310.
4. Waiting about 3~8 mins and N2310/N4310 would have a power up completed beep. (Power LED shows static blue)
5. Execute "Thecus Intelligent NAS" and rescan NAS.

===========================================================
為何 Intelligent NAS 找不到 N2310/N4310? OS6

1. 請確認 Intelligent NAS 已經更新到最新的版本. http://install.thecus.com/
2. 檢查 Windows 防火牆:由 WINDOWS 開始 => 搜尋程式及檔案 => 輸入Allowed Programs =>將“Thecus Intelligent NAS”有關的選項打勾=>並確認. (或暫時停用Windows 防火牆)
3. 連接 N2310/N4310 以及您的NB/PC 至 分享器/路由器/交換器 並在 DHCP的模式下, 將 N2310/N4310 開機.
4. 等待約 3~5 分鐘當 N2310/N4310 開機完畢將會有 "嗶" 的一聲. (藍色電源燈將恆亮)
5. 執行 "Thecus Intelligent NAS" 並 重新掃描 NAS.


============================================================
为何 Intelligent NAS 找不到 N2310/N4310? OS6

1. 请确认 Intelligent NAS 已经更新到最新的版本. http://install.thecus.com/
2. 检查 Windows 防火墙:由 WINDOWS 开始 => 搜寻程序及档案 => 输入Allowed Programs =>将“Thecus Intelligent NAS”有关的选项打勾=>并确认. (或暂时停用Windows 防火墙)
3. 连接 N2310/N4310 以及您的NB/PC 至 分享器/路由器/交换器 并在 DHCP的模式下, 将 N2310/N4310 开机.
4. 等待约 3~5 分钟当 N2310/N4310 开机完毕将会有 "哔" 的一声. (蓝色电源灯将恒亮)
5. 执行 "Thecus Intelligent NAS" 并 重新扫描 NAS.

(412 vote(s))
Helpful
Not helpful

Comments (0)