Knowledgebase
Why the WAN / LAN port runs at 100Mb/s?
Posted by - NA - on 31 December 2010 14:18
The link speed of WAN / WAN port is auto detected. If you connect the NAS to a swiching hub, please make sure the switch is also support GbE, and please replace a new CAT.5E or CAT.6 cable.

If you have try to replace all device but the NAS still link at 100Mb/s, that should be hardware fault. Please contact our local distributor for RMA.

(434 vote(s))
Helpful
Not helpful

Comments (0)